On the Capture Video screen all the connected devices are shown on the Capture device selection menu. Besides the desired capture device the capture template can be selected here.   
For detail settings and the capture procedure, the screen is divided into two areas, the preview area on the left and the information area that shows the most important settings of the target file.
Clicking the Configure button opens the window for adjusting the detail settings of the video options.
Clicking the respective button on the right screen margin opens the Video Device Properties or Audio Device Properties window. You can change the detail settings in both windows, if the connected capture device offers configuration options.  
The following option buttons are available for the selection of the capturing template:   
Native capturing
Optimizes all parameters based on the selected capture device and captures the video in the format specified by the capture device.
The Native capturing option button is selected in the default settings. Capturing in the default settings is recommended.
Custom capture template
Adjusts the detail settings of the parameters. You can select the desired target format. 
In the preview area you can use the Position buttons next to the time code display to move to a certain position within the video title. Furthermore, the following setting options are available:
Button
Starts playback.
Button
Stops playback.
Button
Starts capture.
Button
Rewinds/Fast forwards the video.
Button
Switches to full screen mode. You can return to window mode by pressing the Esc key.
Button
Set the timer that enables specifying the capturing start time, end time and capturing time.
Button
Scans the tape and shows a thumbnail in the scene gallery for each recognized scene. Here the desired scene for capturing can be selected. 
Only available for DV-/HDV cameras in the VCR mode.
Button
Switches to the next/previous channel.
Only available for TV cards.
Slider
Increases or decreases the speed in the playback of the preview of DV-/HDV camera by up to 6 times. As soon as the slider is released it automatically jumps back to the central position and plays the tape back at the normal speed.
Only available for DV-/HDV cameras in the VCR mode.
Jog dial
Navigates through the capture on a frame-by-frame basis.
Only available for DV-/HDV cameras in the VCR mode.
Activate the Enable capture device audio playback check box in the extended area if you want to enable playback on the capture device. This setting does not affect playback of captured video files. 
See also
Preview Scan Window
Video Device Properties Window
Audio Device Properties Window
Capturing Video to Hard Drive
Capturing to Disc On-the-Fly
Importing from the Web


Capture Video Screen