The following requirement has to be fulfilled:
►
The Burn Options screen is displayed.  
To burn a project to a disc, proceed as follows:  
1.
Insert a writable disc in the desired burner.
2.
Select the Burn To entry and the desired burner.
à
The Burn button appears in the window in the lower right corner.
3.
Select the Volume Name option.
à
A dialog area is displayed.
4.
Enter the desired name for the disc in the input field. Characters that are not permitted in the disc name are automatically converted to underscores (_).
5.
Select the Recording Settings option. 
à
The Settings for recording dialog area appears.
6.
In the Speed drop-down menu, select the speed that the burner should use to write to the disc. 
7.
If you want to perform a speed test, select the Determine maximum speed check box. 
à
Before burning, the program verifies whether the burner is capable of burning the session with the selected writing speed. In addition, it also verifies if all files selected for burning are actually available. 
8.
If you still want to burn the disc on positive verification, select the Write check box.
9.
If Nero Vision is capable of changing the book type with your burner and you want to make the changes to the book type, select the required option in the Book Type setting drop-down menu. 
10.
If you want to burn the project directly to the disc without temporarily storing the disc structure on the hard drive first, activate the Use Burn-at-once check box. 
11.
Click the Burn button in the lower right of the screen.
à
The Burning screen is displayed. The project files are converted into the appropriate format and then burned to the disc. The priority determines how much computing power is assigned to the burn process. Normally, you should not change this setting. 
12.
If you want to change the priority of the capturing process, select the relevant entry from the Priority drop-down menu.
13.
If you would like your PC to shut down automatically after successfully burning a disc, select the Shut down computer when finished check box.
à
As soon as the burn process has finished, a window is opened.
14.
If you do not want to save a log file for the burn process, click the No button. 
15.
If you would like to save a log file:
1.
Click the Yes button.
à
A window is opened.
2.
Select the desired folder in the Location drop-down menu.
3.
Enter the desired file name in the File Name input field and click the Save button.
è
You have burned a disc and can now burn the project again or save it, start a new project or create covers and labels.
See also
•
Burn Options Screen


Burning a Disc